Solubility Product and Common Ion Effect Calculator (Ksp to Solubility)
Ksp to molar solubility, and how much a common ion suppresses it
Give it a solubility product and the formula type of the salt — AB, AB₂, A₂B or A₂B₃ — and it returns the molar solubility in pure water, the far smaller solubility when one of the ions is already in the solution, and the number of decades of solubility that common ion costs you. It also takes the two ion concentrations you are actually mixing and tells you whether the ion product Q has passed Ksp, which is the moment a precipitate appears.
Ksp, molar solubility and the common ion effect
silver chloride, Ksp = 1.8e-10, in 0.010 M sodium chloride; and 0.0010 M silver ion mixed with that 0.010 M chloride
One equilibrium, written two ways
- Ksp
- the solubility product: the equilibrium constant for the solid dissolving, with the solid itself left out of the expression because a pure solid’s activity is 1. It depends on temperature and on nothing else — not on how much solid you added, and not on what else is dissolved
- s
- the molar solubility: moles of the salt that dissolve per litre. Not the same as an ion concentration. For AB2 the anion concentration is 2s, and it is that 2 — squared, giving the factor 4 — that makes Ksp = 4s3 rather than s3
- mmnn
- the prefactor: 1 for AB, 4 for AB2 and A2B, 108 for A2B3 and for A3B2. It comes from each ion’s concentration being its coefficient times s, and each being raised to that coefficient
- c
- the common ion concentration from some other salt. It enters raised to the power of that ion’s coefficient, which is why the choice of WHICH ion is in common changes the answer by orders of magnitude for anything other than AB
- Q
- the ion product: the same expression as Ksp but with whatever concentrations you actually have, equilibrium or not. Q below Ksp means unsaturated, Q equal means saturated, Q above means a precipitate forms. It is the only one of these five that is not a constant
Worked example
silver chloride, Ksp = 1.8e-10, in 0.010 M sodium chloride; and 0.0010 M silver ion mixed with that 0.010 M chloride
PURE WATER FIRST. AgCl is an AB salt, so m = n = 1, the prefactor is 1 and Ksp = s2. s = √(1.8 × 10−10) = 1.3416 × 10−5 mol L−1, which on a molar mass of 143.32 is 1.923 mg per litre. That is the number a textbook calls the solubility of silver chloride.
NOW WITH THE CHLORIDE ALREADY THERE. At saturation [Ag+][Cl−] must still equal 1.8 × 10−10. The chloride is 0.010 M from the sodium chloride plus s from the silver chloride — and s is going to be tiny, so 0.010 + s ≈ 0.010. Then s = 1.8 × 10−10 ÷ 0.010 = 1.8 × 10−8 mol L−1.
CHECK THE APPROXIMATION, which is the step textbooks skip. We assumed 0.010 + s ≈ 0.010; s came out as 1.8 × 10−8, which is 0.00018 per cent of 0.010. The assumption is safe by five orders of magnitude. Had the common ion been 1 × 10−5 M instead, s would have been comparable to it and the approximation would have failed; the page warns you when that happens.
THE SUPPRESSION. 1.3416 × 10−5 ÷ 1.8 × 10−8 = 745.36 times less soluble. In decades, log10(745.36) = 2.8724, which is the headline. Note that the suppression factor here equals s(pure) ÷ (Ksp/c) = c ÷ s(pure), so for an AB salt the factor is just the common-ion concentration divided by the pure-water solubility — 0.010 ÷ 1.3416 × 10−5. That shortcut does not survive to AB2.
AND THE PRECIPITATION TEST, which is a separate question. Mixing 0.0010 M silver with 0.010 M chloride gives Q = (0.0010)(0.010) = 1.0 × 10−5. Against Ksp = 1.8 × 10−10 that is 55 556 times too big, so a precipitate forms immediately and copiously. Silver chloride is the classic qualitative test for chloride for exactly this reason: the margin is so large that the result is unambiguous.
WHAT COMES OUT, roughly. Silver is the limiting ion: essentially all 0.0010 mol per litre of it precipitates, because only 1.8 × 10−8 M is left in solution. On 143.32 g/mol that is about 143 mg of AgCl per litre of mixture, while the chloride barely notices.
Silver chloride against rising chloride: the collapse, decade by decade
| Chloride already present | Molar solubility | Times less soluble | Decades | Dissolved salt as a fraction of the chloride |
|---|---|---|---|---|
| 0 (pure water) | 1.342e-5 mol/L | 1.00 | 0.0000 | — |
| 1.0e-5 mol/L | 1.342e-5 mol/L | 1.00 | 0.0000 | 1.34 — approximation invalid |
| 1.0e-4 mol/L | 1.800e-6 mol/L | 7.45 | 0.8724 | 0.018 |
| 1.0e-3 mol/L | 1.800e-7 mol/L | 74.54 | 1.8724 | 0.00018 |
| 1.0e-2 mol/L | 1.800e-8 mol/L | 745.36 | 2.8724 | 0.0000018 |
| 1.0e-1 mol/L | 1.800e-9 mol/L | 7453.56 | 3.8724 | 0.000000018 |
| 1.0 mol/L | 1.800e-10 mol/L | 74535.60 | 4.8724 | 0.00000000018 |
Which ion is in common: silver chromate, 0.010 M of each, Ksp = 1.1e-12
| Common ion | Enters Ksp as | Molar solubility | Times less soluble | Decades |
|---|---|---|---|---|
| None (pure water) | — | 6.503e-5 mol/L | 1.00 | 0.0000 |
| Chromate, CrO4 2-, 0.010 M | first power | 5.244e-6 mol/L | 12.40 | 1.0934 |
| Silver, Ag+, 0.010 M | squared | 1.100e-8 mol/L | 5911.78 | 3.7717 |
Le Chatelier’s principle, applied to a solid that will not quite dissolve
A sparingly soluble salt in water reaches an equilibrium between the solid and its ions. The equilibrium constant for that is the solubility product, Ksp, and because a pure solid has an activity of 1 it does not appear in the expression: for AgCl, Ksp = [Ag+][Cl−]. Ksp depends on temperature and nothing else. It does not depend on how much solid you tipped in, and it does not depend on what else is dissolved.
The molar solubility s is a different quantity: it is how many moles of the salt dissolve per litre. Getting from one to the other needs the stoichiometry. For AmBn, each litre that dissolves s moles produces ms moles of cation and ns of anion, so Ksp = (ms)m(ns)n = mmnnsm+n. That prefactor is 1 for AB, 4 for AB2 and A2B, and 108 for A2B3. Dropping it is the standard error on this topic and it is not a small one: it makes an AB2 answer 59 per cent too high.
Now add a common ion — chloride from sodium chloride, hydroxide from sodium hydroxide, sulfate from sodium sulfate. The product of the ion concentrations still has to come to Ksp, but one of them has been raised by something that did not come from the salt, so the other must fall, and less solid can dissolve. That is Le Chatelier’s principle with no extra ideas in it: you have added a product to an equilibrium and the equilibrium has moved back towards the reactant, which here is the undissolved solid.
The size of the effect is startling, and that is the part worth internalising. Silver chloride in pure water is 1.9 mg per litre, which is already not much. In 0.010 M sodium chloride — a solution far too dilute to taste — it is 2.6 micrograms per litre, 745 times less. This is the quantitative justification for a laboratory habit: a gravimetric precipitate is washed not with pure water but with a dilute solution containing one of its own ions, because pure water would dissolve a weighable amount of it and the wash liquid would run off carrying your result with it.
Finally, Q against Ksp — a related but distinct question. Q is the same expression as Ksp evaluated at whatever concentrations you actually have. If Q is below Ksp the solution is unsaturated and more could dissolve; if Q is above, the solution is supersaturated and solid forms until Q falls back. This is the calculation behind every ‘will a precipitate form when I mix these?’ question, and the trap in it is arithmetic rather than conceptual: mixing equal volumes halves both concentrations, and since Q goes as the product of powers, halving both can drop Q by a factor of four or eight. Compute Q after mixing.
Related pages inside this plugin: the solubility curve and temperature page deals with the salts that are soluble enough to have a curve rather than a Ksp, and molality and mole fraction covers the units a saturated solution’s composition gets reported in. On the medical side of this site, solution osmolarity counts the particles a dissolved salt releases, and the Henderson-Hasselbalch calculator handles the pH equilibrium that governs whether a weakly basic anion stays available. Beer-Lambert absorbance is how a concentration this small actually gets measured, and buffer pH from pKa is the other classic application of the same shift-the-equilibrium reasoning.
Frequently asked questions
Why is Ksp not just the solubility?
Because Ksp is a product of ion concentrations and the solubility is the amount of salt. They differ by the stoichiometry. For AgCl they are related by a square root, so Ksp = 1.8e-10 gives s = 1.34e-5. For Mg(OH)2, Ksp = 4s3, so Ksp = 5.61e-12 gives s = 1.12e-4 — a salt with the smaller Ksp that is nonetheless eight times MORE soluble. Comparing two salts by their Ksp values is only valid when they have the same formula type, and the magnesium hydroxide against silver chloride comparison is the standard exam question built on exactly that trap.
Does adding a common ion change Ksp?
No. Ksp is an equilibrium constant and it changes only with temperature. What changes is the SOLUBILITY, because one factor in the product has been forced up so the other must come down. That distinction is worth being firm about, because a lot of wrong reasoning on this topic starts with the idea that the constant moved. The one honest qualification: at high ionic strength the activity coefficients move away from 1, so the constant written in CONCENTRATIONS does drift even though the true thermodynamic constant does not. That drift makes salts slightly more soluble, not less — the opposite direction to the common-ion effect, and much smaller.
When does the approximation on this page break down?
When the common ion’s concentration is not large compared with what the salt itself supplies. The rule of thumb is a factor of ten: if the common ion is at least ten times the pure-water molar solubility, the error is under a few per cent and the page keeps quiet. Below that the exact polynomial is needed and the page warns you. The dissolved-salt-as-a-fraction-of-the-common-ion row is the number to look at: if it is not well under 0.1, the figure above is a lower bound on the solubility. This page cannot solve the exact cubic or quintic — the engine behind it has no polynomial solver — and saying so is better than hiding it.
Related calculators
References
- CONVENTIONAL TABULATION, NOT A MEASUREMENT. The Ksp values named in the dropdown here — 1.8e-10 for AgCl, 1.08e-10 for BaSO4, 5.61e-12 for Mg(OH)2, 3.45e-11 for CaF2, 1.1e-12 for Ag2CrO4, 2.93e-13 for La2(SO4)3 — are the figures textbooks and handbooks agree on to two or three figures. None is traced to a primary measurement: the CRC Handbook table and the NIST stability-constants compilation were both unreadable on 14 November 2026. Expect your own table to disagree, sometimes by a factor of two, because published values come from different measurements at different ionic strengths. That is why this calculator takes Ksp from you.
- IUPAC, Solubility Data Series, now the IUPAC-NIST Solubility Data Series, at iupac.org/what-we-do/databases/solubility-data-series/ (read 14 November 2026). The authoritative critical compilation of measured solubility: begun in the mid-1970s to “compile and critically evaluate reports of experimental measurements of solubility” from the primary literature, with 104 volumes published by 2017 and a searchable NIST database for selected systems. Named here so you can go to it, and so this page can be honest that the figures it prints are the conventional school-textbook tabulation and were not traced to a volume of it.
- IUPAC, Quantities, Units and Symbols in Physical Chemistry (the Green Book), listed among the IUPAC Color Books at iupac.org/color-books (index page read 14 November 2026). The authority for the symbols used here: b for molality, x for amount fraction, c for amount concentration. The index gives no edition or year and the book itself was not read, so no page is cited from it.
- COULD NOT BE READ, and nothing was substituted for any of it. The NCERT chemistry chapters on solutions and ionic equilibrium, the CRC Handbook of Chemistry and Physics solubility tables, and the individual IUPAC-NIST Solubility Data Series volumes were all paywalled, refused, or returned only third-party reproductions on 14 November 2026. The solubility curves and Ksp values here are therefore the conventional tabulation that textbooks agree on to two or three figures, with no primary measurement traced behind any one number. Where your own table disagrees, use your table.
