Le Chatelier: What Happens If You Change This

Le Chatelier's principle: which way the equilibrium moves when you change something

Choose what you are about to do to the mixture, tell it how the gas moles and the enthalpy stand, and it gives the direction — including the two answers students most often get wrong, where a catalyst and an inert gas at constant volume move the equilibrium precisely nowhere.

What one change does to the position

Pressure, temperature, concentration, inert gas, catalyst
Each of these is a single change made to a mixture that was already at equilibrium. The last three are the ones worth working through even if your question does not ask about them: two of them move nothing at all, for two quite different reasons, and the third behaves like expanding the vessel.
Count only the gases; solids and pure liquids do not take part in a pressure change the way a gas does. For N2 + 3H2 ⇌ 2NH3 it is 2 − 4 = −2, the default here. For N2O4 ⇌ 2NO2 it is 2 − 1 = +1. For H2 + I2 ⇌ 2HI it is 0, and then no pressure change of any kind moves the position — worth seeing once. The Kc and Kp page counts Δn for you from the coefficients if you would rather not do it by hand.
Negative for an exothermic forward reaction, which gives out heat; positive for an endothermic one, which takes heat in. The default −92.4 kJ mol−1 is the Haber process, one of the few numbers every syllabus quotes. The size is not used — Le Chatelier gives a direction, not an amount — but the SIGN decides the whole temperature answer, and getting it backwards is the second commonest error on this topic after mis-counting Δn. Enter 0 for a reaction with no measurable heat change.
The equilibrium position as a block on a track, with the dashed line marking where it was before you touched anything. Choose a change and the block moves to the left station or the right one — or stays exactly where it is, which is what you should see for a catalyst and for an inert gas added at constant volume. The two readouts underneath are the only numbers the verdict uses.
Shifts to the RIGHT, towards the products. Compressing raises the total pressure, and the system relieves it by moving to the side with fewer molecules of gas.Example

the Haber equilibrium N₂ + 3H₂ ⇌ 2NH₃, Δn = −2 and ΔH = −92.4 kJ/mol, with the vessel squeezed to a smaller volume

Advertisement

One principle, and the quotient underneath it

A system at equilibrium, disturbed, shifts in the direction that tends to undo the disturbance  ·  pressure acts through Δn  ·  temperature acts through ΔH and is the only change that moves K itself
Δn
moles of gas on the right minus moles of gas on the left. A pressure or volume change acts only through this number, so a Δn of zero makes the mixture completely indifferent to being squeezed
ΔH
the enthalpy change of the forward reaction. Negative means heat is a product and heating pushes the equilibrium back; positive means heat is a reactant and heating pushes it forward. Treating heat as a reagent turns the temperature rule into the concentration rule
a catalyst
changes neither the position nor K. It lowers the activation energy of both directions by the same amount, so both rates rise by the same factor and their ratio is untouched
inert gas, fixed V
changes neither the position nor K. Every partial pressure and every concentration is exactly what it was; only the total pressure, which appears nowhere in the quotient, has gone up
inert gas, fixed p
behaves as an expansion, because the vessel must grow to keep the pressure constant. That really does lower every partial pressure, so it shifts the position whenever Δn is not zero

Worked example

the Haber equilibrium N₂ + 3H₂ ⇌ 2NH₃, Δn = −2 and ΔH = −92.4 kJ/mol, with the vessel squeezed to a smaller volume
IDENTIFY WHICH NUMBER THE CHANGE ACTS THROUGH. A pressure or volume change acts through Δn and nothing else; ΔH is irrelevant to it. So the −92.4 kJ mol−1 is not part of this answer at all, and an answer that mentions exothermicity here is answering a different question
COUNT THE GAS MOLES. Left: 1 of N2 and 3 of H2, so 4. Right: 2 of NH3. Δn = 2 − 4 = −2, so the right-hand side is the one with fewer gas molecules
APPLY THE PRINCIPLE. Squeezing raises the pressure; the system opposes that by reducing the number of gas molecules; that means going right, towards ammonia
CHECK IT THROUGH THE QUOTIENT, which is the version that never goes wrong. Halve the volume and every concentration doubles. Q = [NH3]2/([N2][H2]3) picks up 22 on top and 24 underneath, so Q is multiplied by 4/16 = 1/4. Q is now below K, and a mixture below K runs forward. Same answer, no remembering required
SAY WHAT DID NOT CHANGE. K is exactly what it was, because the temperature has not changed. The mixture moved to a different set of amounts on the same constant. Only heating or cooling moves K, and that is the dividing line worth carrying into the exam
Advertisement

All ten changes against three reactions, with the two no-shift traps in place

ChangeN₂ + 3H₂ ⇌ 2NH₃ (Δn −2, exo)N₂O₄ ⇌ 2NO₂ (Δn +1, endo)H₂ + I₂ ⇌ 2HI (Δn 0, exo)
Squeeze (smaller volume)rightleftno shift
Expand (larger volume)leftrightno shift
Heat itleftrightleft
Cool itrightleftright
Add a reactantrightrightright
Add a productleftleftleft
Remove a productrightrightright
Inert gas, constant volumeno shiftno shiftno shift
Inert gas, constant pressureleftrightno shift
Add a catalystno shiftno shiftno shift
Read the last three rows together and the topic stops being a list. The catalyst row and the constant-volume inert-gas row are all no shift, for every reaction, because neither change touches any term in the quotient. The constant-pressure inert-gas row is identical to the expansion row, because that is what it is. And the H2 + I2 column is indifferent to every pressure change there is, because its Δn is zero. The Haber reaction is taken as exothermic at −92.4 kJ mol−1; these are the directions this page returns for those signs.

What the principle really says, and the two changes that do nothing

Le Chatelier’s principle is a one-line prediction with a precise engine underneath it. The line is the one the NCERT text uses: a system at equilibrium, subjected to a change in concentration, pressure or temperature, shifts in the direction that tends to undo the effect of the change. The engine is the reaction quotient. Any disturbance either moves Q away from K or it does not; if it does, the reaction runs in whichever direction brings Q back, and that direction is the answer. Everything on this page can be derived that way, and deriving it is far safer than remembering ten separate rules.

A catalyst does nothing to the position, and the reason is worth more than the fact. A catalyst works by offering a path with a lower activation energy. The forward and the reverse reaction go over the same barrier in opposite directions, so lowering it lowers both activation energies by the same amount and multiplies both rate constants by the same factor. K is the ratio of those two rate constants, so the ratio is untouched. The mixture gets to equilibrium sooner and equilibrium is in the same place. Industrially that is still worth a fortune: an equilibrium reached in a year is of no use to anybody.

An inert gas at constant volume does nothing either, for an entirely different reason. Pump argon into a sealed vessel and the pressure gauge certainly goes up. But the quotient is built from the partial pressures of the reacting gases, and each of those is still niRT/V with the same ni, the same V and the same T. Nothing in the quotient has moved, so nothing shifts. The trap is that pressure in Le Chatelier’s statement means the pressure of the reacting species, not the reading on the gauge. Notice that Δn plays no part in this answer, which is the clue that it is a different mechanism from squeezing the vessel.

Change the constraint to constant pressure and the same argon shifts the equilibrium. Now the vessel has to grow to accommodate the extra gas, so V rises, and every reacting partial pressure falls. That is an expansion in all but name, and it favours whichever side has more gas molecules — so it moves the position whenever Δn is not zero. Two identical additions of the same gas, opposite answers, decided entirely by what is being held fixed.

Temperature is the odd one out, and it is the dividing line examiners test. Pressure, volume, concentration, inert gas and catalyst all leave K exactly where it was; they move the mixture to a different point on the same constant. Heating or cooling changes K itself, which is why it is the only change that can set a settled mixture reacting with nobody having touched the amounts. The direction follows from writing heat into the equation as a reagent: an exothermic forward reaction has heat on the right, so heating it is adding a product and the equilibrium retreats. Predicting the NEW K needs the van ‘t Hoff equation and is beyond this page.

Frequently asked questions

Why does adding argon at constant volume do nothing when it clearly raises the pressure?

Because the equilibrium quotient contains the partial pressures of the reacting gases, and argon contributes to none of them. Each reacting gas still has the same number of moles in the same volume at the same temperature, so its partial pressure p = nRT/V is exactly what it was. The gauge reading has gone up because the gauge adds up every gas present, including the argon — and the total pressure appears nowhere in the expression for Q. The NCERT text tabulates this case as no effect regardless of the sign of Δn, and the fact that Δn does not enter is the giveaway that this is not a squeeze in disguise.

Does a catalyst really change nothing at all?

It changes the time taken and nothing else. Forward and reverse reactions share a transition state, so lowering the barrier lowers both activation energies equally; both rate constants rise by the same factor and K, their ratio, is unchanged. What a catalyst does buy you is the freedom to run cooler, and for an exothermic reaction a cooler plant has a better equilibrium position — so a catalyst can improve a real yield indirectly. That is a different statement from saying it shifts the equilibrium.

If squeezing the vessel shifts the position, why does K stay the same?

Because K depends only on the equation as written and on the temperature. Squeezing changes the concentrations, so Q changes, and the reaction runs until Q is back at the same old K — different amounts, same quotient. Only a temperature change moves K itself, and the phrase shifts the equilibrium is used for both situations although they are not the same thing.

Does Le Chatelier tell me how much the yield improves?

No, and this page does not pretend to. The principle gives a direction only. How far the mixture actually moves depends on K and on the amounts you started with, which is an ICE table calculation. That is why the diagram here shows the position sliding to a fixed left or right station rather than a measured distance: drawing a distance would be inventing one.

The question says the pressure was increased, but not how. Does it matter?

Completely, and a good question will tell you. Compressing the vessel concentrates every reacting gas and shifts the position whenever Δn is not zero; pumping in an inert gas at constant volume changes no partial pressure and shifts nothing. Two answers to the same words is precisely what is being tested, which is why they are separate options here.

Related calculators

References

  1. NCERT, Chemistry Part I for class XI, the “Equilibrium” unit, read on 14 November 2026 as “Unit 07 Equilibrium Part-A” on the SATHEE service hosted by IIT Kanpur (sathee.iitk.ac.in), which republishes the NCERT text. This is the source of the relation these pages are built on: Kp = Kc(RT)Δn with Δn = np − nr counted over GASEOUS species only, and of the three consequences it states in words — Δn = 0 makes Kp = Kc, a positive Δn makes Kp larger than Kc, a negative Δn makes it smaller. The same text gives the units as (mol L−1)Δn for Kc and atm or bar to the Δn for Kp; defines the reaction quotient as the same ratio of products over reactants, each term raised to its stoichiometric coefficient, evaluated at any stage of the reaction; states Le Chatelier’s principle as a system at equilibrium responding to a change in concentration, pressure or temperature by shifting “in the direction that tends to undo the effect of the change”; says plainly that “a catalyst cannot alter the state of equilibrium” and only shortens the time taken to reach it; and tabulates no effect for a change made at constant volume, whatever the sign of Δn, which is the inert-gas case.
  2. W. R. Robinson and others, Chemistry 2e, OpenStax, section 13.2, “Equilibrium Constants”, revision of 14 February 2019 (read 14 November 2026). Read for the comparison with the Indian school treatment, and the two differ in a way worth knowing. OpenStax gives the Q against K rules in the same three cases — Q below K and the net reaction runs forward, Q above K and it runs in reverse, Q equal to K and the system is at equilibrium — but it assigns no units at all to Q or K, stating that the rigorous expressions use relative, dimensionless concentrations and pressures, and that disregarding units in an introductory course introduces only modest error. It also declines to put any numeric threshold on “large” or “small” K, saying only that a large K means most of the reactant has been converted by the time equilibrium is reached, and warning in the same section that K says nothing whatever about RATE: some of these equilibria arrive in milliseconds and some take years.
  3. COULD NOT BE READ, and nothing was substituted. The NCERT textbook PDFs on ncert.nic.in were not retrievable on 14 November 2026, so the NCERT material above is cited through the IIT Kanpur republication actually read rather than by textbook page number. Everything this page asserts about catalysts and about an inert gas at constant volume comes from that republication’s own words and table, quoted in the reference above.