ICE Table Equilibrium Calculator

ICE table: initial, change, equilibrium — and solving the quadratic properly

Start with what you mixed and the equilibrium constant, and this builds the three rows of the ICE table and solves for x — with the full quadratic, not the shortcut. It then tells you whether the shortcut would have been safe, and by how much it would have been wrong.

Solve the ICE table for x

Two reactants, exact root, with the 5% check
The initial row of the table: what you put in, before any reaction. In mol L−1. If your question gives moles and a volume, divide first — an ICE table in moles and a K in concentrations is a classic source of a wrong answer that looks right.
The other reactant, also at the start. They need not be equal, and the interesting questions are the ones where they are not: whichever is smaller sets the ceiling on x, because that reactant runs out first.
The constant at the temperature of the experiment. The default 49 is the classic H2 + I2 ⇌ 2HI value used in school questions. Make sure it matches the equation you entered below: reversing the equation replaces K by 1/K and doubling the coefficients squares it.
These two cover the quadratic cases school papers set. In the first, K = x²/((a−x)(b−x)); in the second the product is 2x, so K = 4x²/((a−x)(b−x)) and that factor of 4 changes the answer a great deal. A reaction whose coefficients give a CUBIC — A + 3B ⇌ 2C, for instance — has no closed-form root this engine can print, and the page will not pretend otherwise.
The ICE table as a picture. Reactants run left of the dashed line and the product runs right of it, on one scale. The top row is what you mixed; the middle row is the change, drawn as arrows so you watch the same x leave each reactant and arrive on the product side; the bottom row is what is left. When the products are C + D the bar is [C], and [D] is the same.
0.777778mol/LExample

1.0 mol/L of hydrogen and 1.0 mol/L of iodine, K = 49 for H₂ + I₂ ⇌ 2HI

Advertisement

Three rows, one unknown, one quadratic

I: a, b, 0  ·  C: −x, −x, +gx  ·  E: a−x, b−x, gx  ·  K = (product)2/((a−x)(b−x))  ·  x = 2Kab / (K(a+b) + √(K2(a+b)2 + 4(g−K)Kab))
x
the extent of reaction: how many moles per litre of A and of B have been used up by the time equilibrium arrives. One unknown does the whole table, which is why the method works
the C row
always −x for a reactant with coefficient 1 and +2x for a product with coefficient 2. The coefficients scale the change; they do not create new unknowns. Getting a sign wrong here is the commonest way an ICE table goes astray
g
1 when the products are C + D and 4 when the product is 2C, because (2x)2 = 4x2. It is why the two cases give noticeably different answers from the same K
the shortcut
dropping x from (a−x) and (b−x), which turns the quadratic into x ≈ √(Kab/g). Fast, and safe only while x is a small share of the smaller starting concentration
the stable root
the form printed above is algebraically the same as (−B + √D)/2A but never divides by A, so it survives the case K = g where the x2 term disappears entirely and the textbook formula divides by zero

Worked example

1.0 mol/L of hydrogen and 1.0 mol/L of iodine, K = 49 for H₂ + I₂ ⇌ 2HI
BUILD THE THREE ROWS. Initial: [H2] = 1.0, [I2] = 1.0, [HI] = 0. Change: −x, −x, +2x — the 2 comes from the coefficient of HI and nowhere else. Equilibrium: 1−x, 1−x, 2x
PUT THE EQUILIBRIUM ROW INTO K. K = [HI]2/([H2][I2]) = (2x)2/((1−x)(1−x)) = 4x2/(1−x)2 = 49
TRY THE SHORTCUT FIRST, AND WATCH IT FAIL. Dropping x from the brackets gives 4x2 = 49, so x = √(49/4) = 3.5. That is larger than the 1.0 mol L−1 you started with: the shortcut is asking the reaction to consume three and a half times more hydrogen than exists. It has not merely lost accuracy, it has produced an impossible number, and the page says so
SO SOLVE IT PROPERLY. (4 − 49)x2 + 49(1+1)x − 49 = 0, that is −45x2 + 98x − 49 = 0. The discriminant is 982 + 4(4−49)(49) = 9604 − 8820 = 784, whose root is a tidy 28. The stable form gives x = 2 × 49 / (98 + 28) = 98/126 = 0.777778 mol L−1
THIS SQUARE ROOT IS A SHORTCUT OF ITS OWN, available only because a = b. With equal starting amounts, 4x2/(1−x)2 = 49 can be square-rooted on both sides to 2x/(1−x) = 7, so 2x = 7 − 7x and x = 7/9 = 0.7778. Same answer, and it is worth doing once to see that the quadratic was not an accident. It does NOT work when a and b differ
FILL IN THE EQUILIBRIUM ROW AND CHECK. [H2] = [I2] = 1 − 0.777778 = 0.222222, [HI] = 2 × 0.777778 = 1.555556 mol L−1. Check: 1.5555562/(0.222222 × 0.222222) = 2.41975/0.049383 = 49.0. That self-check costs ten seconds and catches a dropped sign, a forgotten 2 and a mis-typed K all at once
Advertisement

The same mixture at six values of K: where the shortcut stops working

Kx exact, mol/Lx from the shortcutShortcut out byx as % of the limiting reactantShortcut usable?
0.00010.0049750.0050000.50%0.50%yes, easily
0.010.0476190.0500005.00%4.76%yes, just inside
0.10.1365270.15811415.8%13.7%no
1.00.3333330.50000050.0%33.3%no
490.7777783.500000350%77.8%no, and absurdly
100000.98039250.000005000%98.0%no, and absurdly
A + B giving 2C with both reactants at 1.0 mol L−1, so the limiting concentration is 1.0 and the fourth and fifth columns are easy to compare. The five per cent line falls between the second and third rows, and the last two rows are the ones worth staring at: the shortcut returns an x larger than the amount of reactant in the vessel, which is impossible rather than inaccurate. Computed from the exact root used by this page.

What the three rows are for, and when x really is small

An ICE table is a bookkeeping device, and its whole trick is that one unknown does everything. Write what you started with; write the change as −x, −x, +2x or whatever the coefficients demand; add the two rows to get the equilibrium row. Then substitute that last row into the expression for K and solve. There is no second idea in the method. The coefficients scale the change — a species with a 2 in front of it changes by 2x — and that is the step that is usually fumbled, because it is tempting to write +x for every product.

The equation you get is a quadratic, and this page solves it as one. For A + B ⇌ 2C the substitution gives 4x2 = K(a−x)(b−x), which rearranges to (4−K)x2 + K(a+b)x − Kab = 0. Only one of its two roots is physically possible: x has to lie between 0 and the smaller starting concentration, because you cannot consume more reactant than you put in. It is worth knowing WHY that root is always the one taken here. The quadratic is negative at x = 0 and positive at x = min(a,b), so it crosses exactly once in between, whichever way the parabola opens — and the root at that crossing is always the one with the plus sign on the square root.

The shortcut is worth knowing and worth distrusting in equal measure. If x is going to be tiny compared with a and b, then (a−x) is practically a and the quadratic collapses to x ≈ √(Kab/g), one square root instead of a discriminant. The test is the five per cent rule: work x out, express it as a percentage of the smaller starting concentration, and if it is under five per cent the term you dropped was smaller than ordinary experimental error. There is a cheaper test to do BEFORE any algebra, which is the ratio of the smaller starting concentration to K: above a thousand the shortcut is likely fine, between a hundred and a thousand solve then check, below a hundred use the quadratic. Both numbers are printed above.

When the shortcut fails it usually fails spectacularly, which is a mercy. At the defaults here it returns x = 3.5 mol L−1 from a mixture containing 1.0, meaning the reaction has consumed three and a half times more hydrogen than existed. An answer like that is caught instantly. The dangerous region is not the absurd one but the middle: a K that puts x at eight or ten per cent gives a shortcut answer that is wrong by a modest, entirely plausible margin and announces nothing. That is exactly why the five per cent check is a step of the method rather than an optional flourish.

What this page does not do, stated plainly. It handles two reactants and either one or two product species with coefficients of one on the reactants. A reaction such as N2 + 3H2 ⇌ 2NH3 produces a quartic in x, which has no closed form worth printing, and such problems are solved numerically or by a shortcut whose validity you check afterwards. It also starts from pure reactants: if your mixture already contains product, work out Q first to find which way it will move, because the change row then runs the other way. And the special case of a weak acid dissociating — one reactant, two products, which is an ICE table with a name — is Ostwald’s dilution law.

Frequently asked questions

Which root of the quadratic do I take?

The one between 0 and the smaller starting concentration, and there is always exactly one. You can see why without solving anything: at x = 0 the left-hand side of (g−K)x2 + K(a+b)x − Kab is −Kab, which is negative, and at x = min(a,b) it works out to g times that concentration squared, which is positive. A continuous function that goes from negative to positive crosses once. In the standard formula that crossing is always the root with the PLUS sign on the square root, whichever sign (g−K) has.

My calculator says I am dividing by zero. What happened?

Your K is exactly equal to g — 1 for C + D products, 4 for 2C — so the x2 term has vanished and the equation is linear rather than quadratic. The textbook (−B ± √D)/2A divides by A, and A is now zero. The answer is the tidy x = ab/(a+b). This page uses an algebraically identical form of the root that never divides by A, so it returns that answer without complaint and tells you what happened.

Can I use this when there is already some product in the mixture?

Not directly. This page assumes the initial product concentration is zero, which is the usual school setup. With product present the reaction may run either way, so the change row might be +x, +x, −2x instead — and which it is depends on comparing Q with K. Work that out first; if the reaction is going to run backwards, redraw the table with the signs reversed and treat the products as the starting materials.

Why does switching from C + D to 2C change the answer so much?

Because the product term is squared. With 2C the product concentration is 2x, so the top of the K expression is (2x)2 = 4x2 rather than x2: the same K is satisfied by a much smaller x. The factor appears in the shortcut too, as the g in √(Kab/g). This is the same point that makes a K meaningless without the equation it belongs to — and it is why the second input on this page is a choice of equation shape rather than a decoration.

What about a reaction like N₂ + 3H₂ ⇌ 2NH₃?

That one is outside what this page can solve, and saying so is more useful than a wrong answer. With a coefficient of 3 the change row is −3x for hydrogen, so (b−3x) is cubed in the denominator and the equation is a quartic in x with no usable closed form. Such problems are handled numerically, or with a small-x approximation whose validity you check afterwards using exactly the five per cent rule described here. The Kc and Kp page will still give you K itself from measured equilibrium amounts for any such reaction.

Related calculators

References

  1. Equilibrium Calculations: The “Small-X” Assumption, UCalgary Chemistry Textbook (Chemistry Open Textbook, version 2), adapted from OpenStax Chemistry 2e under CC BY 4.0 and credited to E. Sullivan and A. Musgrove of the University of Calgary with E. Merschrod of Memorial University (read 14 November 2026). The source of the two tests this batch prints. The five per cent rule: the assumption that the change x can be dropped from a starting concentration is acceptable when x is less than about five per cent of that concentration, the page’s stated reason being that ordinary experimental error is itself about five per cent, so a change below that level adds little uncertainty. And the pre-check before you solve anything: a starting concentration more than a thousand times K makes the shortcut likely safe, a ratio between a hundred and a thousand needs the check afterwards, and a ratio below a hundred usually calls for the quadratic formula. The page’s instruction when the check fails is to redo the calculation with the quadratic rather than to patch the approximate answer.
  2. NCERT, Chemistry Part I for class XI, the “Equilibrium” unit, read on 14 November 2026 as “Unit 07 Equilibrium Part-A” on the SATHEE service hosted by IIT Kanpur (sathee.iitk.ac.in), which republishes the NCERT text. This is the source of the relation these pages are built on: Kp = Kc(RT)Δn with Δn = np − nr counted over GASEOUS species only, and of the three consequences it states in words — Δn = 0 makes Kp = Kc, a positive Δn makes Kp larger than Kc, a negative Δn makes it smaller. The same text gives the units as (mol L−1)Δn for Kc and atm or bar to the Δn for Kp; defines the reaction quotient as the same ratio of products over reactants, each term raised to its stoichiometric coefficient, evaluated at any stage of the reaction; states Le Chatelier’s principle as a system at equilibrium responding to a change in concentration, pressure or temperature by shifting “in the direction that tends to undo the effect of the change”; says plainly that “a catalyst cannot alter the state of equilibrium” and only shortens the time taken to reach it; and tabulates no effect for a change made at constant volume, whatever the sign of Δn, which is the inert-gas case.
  3. W. R. Robinson and others, Chemistry 2e, OpenStax, section 13.2, “Equilibrium Constants”, revision of 14 February 2019 (read 14 November 2026). Read for the comparison with the Indian school treatment, and the two differ in a way worth knowing. OpenStax gives the Q against K rules in the same three cases — Q below K and the net reaction runs forward, Q above K and it runs in reverse, Q equal to K and the system is at equilibrium — but it assigns no units at all to Q or K, stating that the rigorous expressions use relative, dimensionless concentrations and pressures, and that disregarding units in an introductory course introduces only modest error. It also declines to put any numeric threshold on “large” or “small” K, saying only that a large K means most of the reactant has been converted by the time equilibrium is reached, and warning in the same section that K says nothing whatever about RATE: some of these equilibria arrive in milliseconds and some take years.
  4. COULD NOT BE READ, and nothing was substituted. The NCERT textbook PDFs on ncert.nic.in were not retrievable on 14 November 2026, so the NCERT material above is cited through the IIT Kanpur republication actually read rather than by textbook page number. Everything this page asserts about catalysts and about an inert gas at constant volume comes from that republication’s own words and table, quoted in the reference above.